IMPORTANT: THIS APPLICATION WILL NOT WORK WITH THE STANDARD RADIO THERMOSTAT WIFI MODULE.
It will ONLY work with the “cloudbeam” WiFi module for the Radio Thermostat line of thermostats available at our distributor at (http://www.homewerksww.com) and other retailers.
This application allows you to control any Radio Thermostat communicating thermostat model, any Axis PTZ (Pan Tilt Zoom) or non-PTZ camera, a cloudbeam dimmable lighting controller or a cloudbeam direct load controller. For this application to run, your devices must be registered on the my.cloudbeam.com website (or other partner websites that are "Powered by Cloudbeam".
After you put your device on your Wi-Fi network, to Register, please go to my.cloudbeam.com. Create a new user account. Add the device to your account.
On the iphone app, please sign in with your account login information, and then the iPhone application will be able to also communicate with your device and control it.
THERMOSTASTS - You can control temperature, mode, Hold, the fan and some other settings depending on the thermostat. You can also create and save schedules on the web portal and save them to the device. The fan can be controlled by touching the fan Icon - remember, this is not just an on/off but is also a function of your temperature settings - so you may not be able to turn the fan off if your HVAC is calling for fan.
If you have more than one thermostat, swipe your finger up and down in the middle of the screen to see the others.
DIRECT LOAD or SMART PLUG control - See the power measurement of the device being controlled, and turn the device on and off through the buttons.
DIMMABLE LIGHTING CONTROL - See the power measurement of your device, and control the on or off, and the dimming function by sliding your finger along the dim bar at the top of the screen.
AXIS CAMERA CONTROL - For Pan, Tilt, and Zoom go to full screen mode and use your fingers to move the camera view (pinch will zoom and unzoom). Presets are also available.
GROUPS and SCENES - Group controllers to control more than one device at a a time, and Scene controls to send multiple commands to many devices are available and can be created on the phone application.
If you have more than one home, you will see them by touching the home picture. When you select a home, the devices you have assigned to that home will be displayed.